Description
Gloss Seal is an all-weather, high-solids, acrylic polymer and solvent emulsion formulated to provide a long lasting and UV stabilised protective seals on most concrete, marine and sports court surfaces such as indoor basketball and netball courts.
Typical concrete and marine coverage is 5sqm per litre per coat which translates to 1 x 20L bucket for every 50sqm.
Prior to application of Gloss Seal, it is recommended to thoroughly clean the surface using an approved Able Westchem detergent and allow overnight to dry.
Gloss Seal should only be applied to a clean, dry surface. For most applications, two coats is normally sufficient leaving at least an hour between coats, however, some surfaces may require further coats to provide a higher gloss coating. Gloss Seal should normally be applied using a lamb’s wool applicator or roller, or good quality paint brush. Spray applications are not recommended (unless used by a professional) because of fire risk, however, this product is perfectly compatible with the spray method of application otherwise.
Gloss Seal should be stirred or shaken well before use and only be applied to surfaces with temperatures between 10 to 30 degrees Celsius with moisture content between 0 to 15%. A moisture meter is recommended to indicate curing conditions. Airflow is required to aid the drying process, however, too much air flow can cause the coating to dry too quickly.
Note
This product is highly flammable and should be used and stored away from all sources of flame or ignition.
