Description
Acri-Seal Water Based Acrylic Sealer is a non-toxic, water-based acrylic sealer that is ideal for use as a concrete sealer, terrazzo sealer, clay brick sealer, reconstituted limestone sealer, natural limestone sealer, walkway sealer or general purpose topcoat (excluding marine).
This sealer is non-hazardous, low odour and delivers excellent adhesion and high durability that keeps concrete and masonry better for longer. This product can deliver excellent levels of gloss which can be varied by the number of coats or dilution with water.
Use with confidence on:
- Warehouses
- Garages
- Tilt up industrial buildings
- Domestic concrete floor areas
For new concrete, ensure the concrete has cured for at least 21 days for best results. Ensure that all traces of oil, dust or other contaminants have been removed, as this may affect adhesion. On old concrete, remove all contaminants by using chemicals in combination with high pressure washing. Once surface is clean allow the surface to dry before applying. The level of cleaning will determine the final appearance that will be achieved.
Apply via spray pack (weed spray type), trigger spray, brush or roller at the typical coverage rate (see technical information). For new or dense concrete it may be necessary to dilute Acri-Seal Water Based Acrylic Sealer at a ratio of 1:1 with water and apply this diluted mixture. If the first coat leaves a well sealed surface, and to prevent a high gloss finish (if you do not want a high gloss), then dilute the second coat 1:1 with water as well, and apply at the typical coverage rate. If you require a high gloss finish, then apply the second coat without any dilution. For aged, worn or crumbling concrete, use this product as received without diluting.
Do not apply to wet concrete or surfaces that have a moisture content of more than 15%.
Refrain from applying if it is going to rain on the surface within 48 hours or if surface temperature is below 9 degree Celcius or the air humidity is above 80%. Use only water to thin or dilute. Store product container in a cool area out of direct sunlight with lid firmly affixed.
